Carr Lane Roemheld Mfg. Co.--
Go Home


Go Home
-------------------------
About US
-------------------------
Product
-------------------------
Factory Tour
-------------------------
 Management
-------------------------
OEM/ODM
-------------------------
Quality Control
-------------------------
R & D
-------------------------
Contact Us

Carr Lane Roemheld Mfg. Co.
Product

Product Search
Model number:
Product Name:Magnetic Molds
Area Made:USA
Explanation:Besides plastics processing, M-TECS systems are extensively used in the rubber and ceramics industries. Whether on a 30 ton or a 4,000 ton machine, in a horizontal or vertical set-up, with or without heating, on a new machine or as a retrofit, the systems can be universally used and adapted
Model number:
Product Name:Magnetic Molds
Area Made:USA
Explanation:M-TECS systems are extensively used in the rubber and ceramics industries. Whether on a 30 ton or a 4,000 ton machine, in a horizontal or vertical set-up, with or without heating, on a new machine or as a retrofit, the systems can be universally used and adapted
Model number:
Product Name:Magnetic Molds
Area Made:USA
Explanation:M-TECS 2000x1000 mm (78.74"x39.37"), 260¢X C (500¢X F), on a power press
Model number:
Product Name:Forging Molds
Area Made:USA
Explanation:Wedge Clamps for Forging are designed to suit the adverse conditions of forging, while minimizing press down time. The retracting clamping bolt and its rugged housing help to isolate forging heat and shock loads from the hydraulic circuit. The wedge clamp's self-locking tapered bolt clamps on a mating 20¢X beveled surface on the die. An optional series valve integrated into the clamp monitors the position of each cylinder and provides a high level of safety.
Model number:
Product Name:Forging Molds
Area Made:USA
Explanation:Double-Acting Wedge Clamps provide sure, safe clamping of tools with standard straight clamping edges. Their two-piece wedge clamping bolt and block cylinder combine to offer mechanical locking with hydraulic assist. The fully retracted bolt extends from the housing then clamps straight down on the flat surface of the tool without creating any side load. The hydraulically operated clamp then wedges internally, mechanically locking the clamp. Three sizes, with clamping forces from 5,625 to 22,500 lbs. (These compact clamps are the most popular type used in injection molding machines.)
Model number:T00013
Product Name:Magnetic Molds
Area Made:USA
Explanation:The patented M-TECS concentration effect makes the system stronger and hence safer than other technologies. The long pole design with double magnets ensures a unique performance: Magnetic forces which are actually outside of the die concentrate in the clamping surface. High power for maximum safety.
9  3[ 1 ] [ 2 ] 4  
Contact Details
Email:engr@clrh.com
Key Contact
Tel:636) 386-8022
Email:engr@clrh.com
Fax:636) 386-8034
Name:Hosun
Website:www.clrh.com
Professional title:Service personnels
Address:16345 Westwoods Business Park Dr. ¡V Ellisville, Missouri USA 63021